| Model |
IS600-7K5GB-4T |
| Power |
7.5KW |
| Rated Current |
17A |
| Output Voltage |
380V-440V/480V |
| input voltage range |
250V to 800/900VDC input, 3PH 380/440/480VAC output, 4T model |
| Recommended input voltage (Voc and Vmp) |
Voc 650VDC, Vmp 540VDC for 3T model & 380VAC pumps |
| Motor type |
Control for permanent magnet servo motor and asynchronous motor pumps. |
| Input power |
DC power from solar arrays or AC grid power |
| Maximum DC power input |
800/900VDC for 380V AC output |
| Rated output voltage |
3-phase 220V/380V/480V |
| Output frequency range |
0~50/60Hz |
| Output frequency range |
99.60% |
| Ambient temperature range |
G-type inverter with submersible pumps, and P type for general pumps. |
| Solar pump control special performance |
MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation,dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating. |
| Protection function |
Phase loss protection, phase short circuit protection , ground to phase circuit protection , input and output short circuit protection. Stall protection |
| Protection degree |
IP20, Air force cooling |
| Running mode |
MPPT , CVT, variable frequency mode |
| Altitude |
Below 1000m; above 1000m, derated 1% for every additional 100m. |
| Standard |
CCC, CE, IEC |
Rania –
Very Esay to use, and the efficiency of MPPT is real and very high. I got full technical support how to install and run